Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 146

Parameter Assignment/Addressing
6.11 Options for Auto Menu (4)
External 5
External 6
External 7
External 8
External 9
Use the pick list variables to assign hardware inputs to internal analog variables used within the code as assigned by the associated
SOP flag selections.
Table 6-71 Analog Output Menu (4660) Parameters for External Outputs
Parameter ID
Analog out‐ 4660+4(n-1)+1
put #n*
Analog vari‐ 4660+4(n-1)+2
able
Output mod‐ 4660+4(n-1)+3
ule type
Full range 4660+4(n-1)+4
*
Configuring the External Outputs
Set up the analog outputs via the pick list parameters in the analog output menus, 4661 through
4721, to complete setup:
1. Select the variable to be output to the analog output module from the pick list; all units are
%.
2. Select the type of output, unipolar or bipolar.
3. Select the percent of the value to provide scaling of the variable.
144
External 15
External 16
External 17
External 18
External 19
Unit Default
Submenu
Total Cur‐
rent
Unip
% 0.0
Each analog output parameter, 1 to 16, contains a submenu consisting of the following
parameters:
• Analog variable
• Output module type
• Full range
The formulas presented in the ID column give you the direct ID number for the corre‐
sponding analog output.
For example, for analog output 4:
• The analog output ID will be 4660 + 4 (4 - 1) + 1, or 4673.
• The analog variable ID for analog output 4 will be 4660 + 4 (4 - 1) + 2, or 4674.
Internal AI1
Internal AI2
Internal AI3
Internal AI4
Internal AI5
Min Max Description
Submenu for analog output n (n = 1 to 16).
Set the input source for analog output n.
See Table Pick list for Analog Output Variable Pa‐
rameters.
Set the output type for the module:
• Unip (unipolar)
• Bip (bipolar)
0.0 300.0 Scale the output range of the selected variable.
Internal AI11
Internal AI12
NXGPro+ Control Manual
Operating Manual, A5E50491925A