Options For Drive Menu (2) - Second Part - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

6.6

Options for Drive Menu (2) - second part

Internal I/O Submenus
The Internal I/O Menu (2805) consists of the parameters and submenus listed below. Contents
of these submenus are explained in the tables that follow.
Table 6-20 Internal I/O Menu (2805) Parameters
Parameter ID
Set Module Ad‐ 2819
dresses
Watchdog timeout 2821
Module 1 2806
Module 2 2807
Module 3 2808
Module 4 2809
Table 6-21 Internal I/O Module 1 (2806) Parameters
Parameter ID
Module Type 2801
Voltage 2561
Int Analog In1 2815
Int Analog In2 2825
Int Analog In3 2835
Int Analog Out1 2845
Int Analog Out2 2855
NXGPro+ Control Manual
Operating Manual, A5E50491925A
Unit Default Min
Function
sec 0.01 0.01
Submenu
Submenu
Submenu
Submenu
Unit Default Min
0 0
V 120 -200
Submenu
Submenu
Submenu
Submenu
Submenu
6.6 Options for Drive Menu (2) - second part
Max Description
Fix internal I/O "old module address not same as new" er‐
rors.
10 Set the internal I/O watchdog timeout period.
Access the setup menu for internal I/O module 1.
See Table Internal I/O Module 1 Menu (2806).
Access the setup menu for internal I/O module 2.
See Table Internal I/O Module 2 Menu (2807).
Access the setup menu for internal I/O module 3.
See Table Internal I/O Module 3 Menu (2808).
Access the setup menu for internal I/O module 4.
See Table Internal I/O Module 4 Menu (2809).
Max Description
2 Set the type for internal I/O module 1. 0 = no
module installed.
200 Set the required module voltage. Possible op‐
tions are:
• 24 V
• 120 V
Access the setup menu for internal analog in‐
put 1.
See Table Internal Analog Input 1 Menu (2815).
Access the setup menu for internal analog in‐
put 2.
See Table Internal Analog Input 2 Menu (2825).
Access the setup menu for internal analog in‐
put 3.
See Table Internal Analog Input 3 Menu (2835).
Access the setup menu for internal analog out‐
put 1.
See Table Internal Analog Output 1 Menu
(2845).
Access the setup menu for internal analog out‐
put 2.
See Table Internal Analog Output 2 Menu
(2855).
Parameter Assignment/Addressing
113