Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 144

Parameter Assignment/Addressing
6.11 Options for Auto Menu (4)
Table 6-67 Analog Input #5 Menu (4341) Parameters
Parameter ID
Source 4342
Type 4343
Min input 4344
Max input 4345
Loss point threshold 4346
Loss of signal action 4347
Loss of signal set‐ 4348
point
Table 6-68 Auxiliary Input #1 Menu (4500) Parameters
Parameter ID
Source 4510
Type 4520
Min input 4530
Max input 4540
142
Unit Default Min
Off
4–20 mA
% 0.0 -300.0 300.0
% 100.0 -300.0 300.0
% 15.0 0.0
Preset
% 20.0 -200.0 200.0
Unit Default Min
Off
4–20 mA
% 0.0 -300.0 300.0
% 100.0 -300.0 300.0
Max Description
Set the input source for analog input 5:
• Off
• Ext 1 to 24
• Int 1 to 12
See Table Pick list for Analog Input Sources.
Note: Analog input number is redundant since the
menu displays the input number.
Set the operational mode for analog input 5:
• 0 to 20 mA
• 4 to 20 mA
• 0 to 10 V
• -10 V to +10 V (Note: This option is not allowed
to be selected if the analog source is one of the
internal I/O inputs.)
Minimum analog input.
Maximum analog input.
100.0 Threshold where loss of signal action is activated.
Enter as a percentage of upper range for any type.
Select loss of signal action:
• Preset
• Maintain
• Stop
Loss of signal preset speed.
Max Description
Auxiliary input 1 source:
• Off
• Ext 1 to 24
• Int 1 to 12
See Table Pick list for Analog Input Sources.
Set the operational mode for auxiliary input 1:
• 0 to 20 mA
• 4 to 20 mA
• 0 to 10 V
• -10 V to +10 V (Note: This option is not allowed
to be selected if the analog source is one of the
internal I/O inputs.)
Minimum auxiliary input.
Maximum auxiliary input.
NXGPro+ Control Manual
Operating Manual, A5E50491925A