Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 153

Security Edit Functions
An electronic security code is provided to limit unauthorized access to various parameters within
the drive equipment.
Table 6-81 Security Edit Functions Menu (5000) Parameters
Parameter
Change security level
Drive running inhibit
Change security codes
Changing parameter settings for Drive Running Inhibit (5020)
Changes to Drive running inhibit (5020) may enable parameter changes while the drive is
running.
This may result in drive trip or instability.
Do not change the Drive running inhibit (5020) setting of any parameter unless you are
completely certain that the change is safe.
Editing security levels
When you select either of these functions, the display returns to the top of the Main Menu (5).
You can navigate the menu system as you normally would.
1. When the menu item, that you want to change is displayed, press the [ENTER] key to edit the
security level. An asterisk character (*) appears on the left of the display to indicate that the
menu or submenu is in the security edit mode, and not in normal mode.
2. Press the [CANCEL] key to exit the security edit mode.
NXGPro+ Control Manual
Operating Manual, A5E50491925A
ID Type Description
5010 Function Set the level of security on a menu item. Prohibit access to a menu or menu
items until "enter security level" is set to that level or higher.
When active, an "x" will appear as the first character on the second line of
the display.
1. Scroll past Main Menu (5) into another menu. The current security
2. Press [ENTER] to edit the security level for the ID that is shown.
3. Choose level: 0, 5, 7
5020 Function Enable or disable a menu item's run inhibit. Prohibit certain parameters
from being changed when drive is in the Run State (D).
When active, an "x" will appear as the first character on the second line of
the display. The current run inhibit state will appear as the last character
on the second line of the display.
Drive running lockout will not allow the parameter to be changed while
the drive is running.
"0" indicates that a parameter may be changed while the drive is running.
"1" indicates that a parameter may not be changed while the drive is run‐
ning.
5090 Function Change the default security codes for the various security levels used by
the drive. See Section Security Access Levels and Codes. This is how the
parameter displays in the keypad.
CAUTION
level will appear as the last character on the second line of the display.
Parameter Assignment/Addressing
6.12 Options for Main Menu (5)
151