Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 172

Parameter Assignment/Addressing
6.18 Options for Communications Menu (9)
NOTICE
Changing the Network Configuration Requirememnts
Changing the network configuration (e.g. parameter 9310, 9320, or 9330) requires exiting the
keypad menu to return to the main screen. Then wait 30 seconds and reboot the DCR.
• For versions 8.0.0 through 8.0.2, wait approximately 30 seconds and reboot the DCR.
• For versions 8.1.0 and above, the changes should take effect within a few seconds. There
• For all versions of NXGPro+, DO NOT USE the 192.168.1.xxx network (range 192.168.1.1
170
is no need to reboot the DCR.
through 192.168.1.255) for network configuration. It will not work and ToolSuite access
will be lost. Access to ToolSuite iS recoverable via the Keypad.
NXGPro+ Control Manual
Operating Manual, A5E50491925A