Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 349

Perform the following steps to access menus via the Speed Menu function:
1. Press [SHIFT] followed by the numeric key, e.g.
– Press [SHIFT]+[1] to access the Motor Menu.
– Press [SHIFT]+[2] to access the Drive Menu.
Accessing menus via Numerical Menu Access mode
Use the numeric keys for Numerical Menu Access mode, a second menu access function for all
remaining menus. Use to access the following:
• menus
• submenus
• parameters
• pick lists
Numerical Menu Access mode requires more keystrokes than the Speed Menu function.
However, this feature provides access to all security-approved items rather than only the 10 basic
menus.
Accessing items in this manner requires that you know the four digit ID number associated with
the target item. This number is listed on the display each time the item is displayed.
To use this feature, refer to Activating Numerical Access Mode in Section Arrow Keys of this
chapter.
Changing values of system parameters
Use the numeric keys to change the values of system parameters:
1. Select a parameter for modification. As soon as a parameter is selected, the left most digit of
the parameter value is underlined and is called the active digit.
2. Press a numeric key to change the active digit.
This method automatically advances the underline to the next digit to the right.
3. Continue pressing numeric keys until the desired value is displayed.
4. Press [ENTER] to accept the new value.
NXGPro+ Control Manual
Operating Manual, A5E50491925A
Figure 9-3 Numeric Touch Keypad Button
Software user interface
9.1 SIMATIC Keypad
347