Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 392

Software user interface
9.2 Multi-Language Keypad
The multi-language keypad is intended as a direct replacement for the standard keypad. The
electrical connection and mechanical fit/mounting are the same between the multi-language
keypad and the standard keypad.
Keypad Functions
Use the keypad to:
• navigate through the menu system
• activate control functions
• reset the system after faults have occurred
• edit parameter values
• enter security access codes
• start or stop the drive when in local control
Accessing control parameters and functions via the keypad
Use the keypad and display interface to access the control parameters and functions of the drive.
Parameters are organized into logical groups and are accessible via a menu structure.
1. Navigate through the menu structure to the desired parameters, to view or edit parameters.
2. Use navigation arrow keys or special key sequences as short cuts. A summary of these key
sequences is given later in this chapter.
3. Use the [SHIFT] key in conjunction with the 10 numeric keys and the [ENTER] key to access
nine common system menus, a help display function and a [CANCEL] key.
Assignment of functions to the keypad keys
The keypad contains 20 keys. Each of these keys has at least one function associated with it,
some keys have more functions. The following sections give descriptions and uses of each of the
keys on the keypad, as well as the diagnostic LEDs and the built-in display.
Improper Keypad Operation
Although the drive comes standard with a keypad interface, and the menu system is secured
with multiple, programmable password levels, for security or other reasons, the drive is capable
of running without the keypad.
Switching components during operation may cause personal injury or impair system functions.
Never add or remove the keypad with power applied to the control.
390
CAUTION
NXGPro+ Control Manual
Operating Manual, A5E50491925A