Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 384

Software user interface
9.2 Multi-Language Keypad
• VLTS: motor voltage
• ITOT: total output current
The value or state of each field is shown dynamically in the second column of the display.
[MODE] field
The [MODE] field is fixed.
The last four fields on the display contain parameter values that can be defined by the user.
All four variable displays can be selected from a pick list using the display parameters (8000).
The [MODE] field displays the current operational mode of the system.
This field can have any one of the displays summarized in Table Line 1 of mode field depending
on the current operational mode or the current state of the drive.
Rollback [RLBK] Mode
The following figure depicts the display in rollback mode.
Figure 9-45
The KYPD field displays the current operational mode of the system.
This field can have any one of the displays summarized in Table Line 2 of mode display
depending on the current operational mode or the current state of the drive.
Regeneration [RGEN] Mode
The following figure depicts the display in regeneration mode.
Figure 9-46
382
Dynamic_Program_Meter_Display_Rollback
Dynamic_Program_Meter_Display
NXGPro+ Control Manual
Operating Manual, A5E50491925A