Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 78

Hardware User Interface Description
5.3 User Accessible Interfaces
or isolation of the module group. If properly organized, the system can service differing voltage
levels and systems.
Refer to literature on the WAGO website for specific information about limitations and power
equipment.
Figure 5-5
Table 5-2
Module Function
Digital Output
Digital Input
Analog Output
Analog Input
Special Module
Setting DIP switches on the Modbus coupler
The Modbus coupler provides the communication between the control and the WAGO I/O
system. The Modbus coupler is configured at the Siemens factory and there is normally no need
to make changes.
NOTICE
Changing standard settings
Only personnel trained by Siemens are entitled to perform changes of standard settings.
Work carried out incorrectly can result in damage to the equipment and in breakdown during
operation.
Ensure that only personnel trained by Siemens carry out work on the equipment.
76
WAGO I/O System
WAGO I/O Module Color Codes
Color
Red
Yellow
Blue
Green
Colorless
Operating Manual, A5E50491925A
NXGPro+ Control Manual