Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 60

NXGPro+ Control Description
4.7 Control Modes
Figure 4-12
• I
• Drive output PF < 1 (motor inductance voltage drop is compensated)
• Motor PF (rotor reference) = 1 with the motor inductance drop being compensated
• Auto PF is on (X
Figure 4-13
• I
• Drive output PF < 1 (motor inductance voltage drop is compensated)
• Motor PF < 1 (X
• I
Parameter Settings for PMM Control
The parameters associated with this control mode are:
• Stator Ls Total (1081) to select auto PF or auto phase advance control.
• Reactive current mode (2981) to select the mode of operation.
• Output Ids (2982) to enter a value between -100.0 % and 100.0 % for manual control.
58
Auto Phase Advance below base speed
= 0
ds,ref
compensation)
L
Auto Phase Advance above base speed
is from the output of the voltage regulator
ds,ref
compensation is on)
L
< 0
ds
NXGPro+ Control Manual
Operating Manual, A5E50491925A