Symbols Used In The Manual Or On The Equipment - GE 9100c Technical Reference Manual

9100c

1.6 Symbols used in the manual or on the equipment

On (power)
On (system on)
Off (system standby)
AC on and battery charging
Dangerous voltage
Direct current
Caution, consult accompanying documents
Consult instructions for use
Pneumatic inlet
SN
Serial number
Equipotential
1-8
M1207027
Reproduced from the electronic master in MATRIX
Symbols replace words on the equipment, on the display, or in GE
Healthcare manuals. No one device or manual uses all the symbols.
Warnings and Cautions tell you about dangerous conditions that can
occur if you do not follow all instructions in this manual:
• Warnings tell about a condition that can cause injury to the
operator or the patient.
• Cautions tell about a condition that can cause damage to the
equipment.
Read and follow all warnings and cautions.
O
REF
004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English
Off (power)
+
O flush button
2
2
ACGO
Battery on
Type B equipment
Frame or chassis ground
Alternating current
Attention, refer to product instructions, IEC
60601-1
Exhaust
Stock number
Lamp, lighting, illumination
M1207026