Table 3: Show Services Accounting Aggregation Output Fields - Juniper EX9200 Features Manual

Output Fields
Copyright © 2017, Juniper Networks, Inc.
show services accounting aggregation source-destination- prefix order packet
detail on page 50
show services accounting aggregation source-destination- prefix extensive
limit on page 51
show services accounting aggregation source-destination-prefix name terse on page 51
Table 3 on page 49 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 3: show services accounting aggregation Output Fields

Field Name Field Description
Name of the service accounting interface.
Service Accounting
interface
Index corresponding to the service accounting interface.
Local interface
index
Name of a service that was configured at the [
Service name
accounting]
the service was configured at the [
hierarchy level.
Protocol Protocol identifier and number.
Source port identifier and number.
Source Port
Destination port identifier and number.
Destination Port
Source autonomous system (AS) number.
Source-AS
Destination AS number.
Destination-AS
Source prefix.
Source Prefix
Destination prefix.
Destination Prefix
Source address.
Source address
Source prefix length.
Source prefix length
Destination address.
Destination address
Destination prefix length.
Destination prefix
length
SNMP index of the interface the packet came in on.
Input SNMP
interface index
SNMP index of the interface the packet went out on.
Output SNMP
interface index
show services accounting aggregation
hierarchy level. The default display,
edit forwarding-options sampling-level
Chapter 5: Operational Commands
edit forwarding-options
(default sampling) , indicates
]
49