Show Firewall Filter Version; Table 14: Show Firewall Filter Version Output Fields - Juniper EX9200 Features Manual

show firewall filter version

Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields

Table 14: show firewall filter version Output Fields

Field Name Field Description
Name of a filter that has been configured with the
Filter
Display the version number of the firewall filter.
Version
Sample Output
show firewall filter version
Copyright © 2016, Juniper Networks, Inc.
show firewall filter version <filter-name>
Command introduced in Junos OS Release 10.2R2.
Display the version number of the installed firewall filter in the Routing Engine.
none—(Optional) Display the version number of all installed firewall filters.
filter-name—(Optional) Name of a configured filter. If you specify the name of a filter,
only the version number of that filter is displayed.
The initial version number is 1. This number increments by one when you modify the
firewall filter settings or an associated prefix action. The maximum version number is
4,294,967,295. When the version number reaches 4,294,967,295, this number is reset
to 1.
view
show firewall filter version on page 251
Table 14 on page 251 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
user@host> show firewall filter version
Filter version information :
Filter
test
Chapter 19: Firewall Filter and Policer Operational Mode Commands
show firewall filter version
statement at the
filter
Version
command.
hierarchy level.
[edit firewall]
10
251