Uplink Ports On Acx500 Routers - Juniper ACX500 Hardware Manual

Uplink Ports on ACX500 Routers

IN THIS SECTION
Gigabit Ethernet RJ-45 Ports | 62
Gigabit Ethernet SFP Ports | 63
PoE Ports | 64
Unless otherwise specified, the information about the ports applies to both ACX500 indoor and outdoor
routers.
TIP: You can find information about the pluggable transceivers supported on your Juniper
Networks device by using the Hardware Compatibility Tool. In addition to transceiver and
connector type, the optical and cable characteristics—where applicable—are documented for
each transceiver. The Hardware Compatibility Tool allows you to search by product, displaying all
the transceivers supported on that device, or category, displaying all the transceivers by interface
speed or type. The Hardware Compatibility Tool is located at
The list of supported transceivers for the ACX500 is located at
product/#prd=ACX500.
Gigabit Ethernet RJ-45 Ports
The Table 10 on page 62 describes the Gigabit Ethernet RJ-45 ports of the ACX500 routers.
Table 10: RJ-45 Port Features
Feature
Supported standards
Description
•
10BASE-T Copper
•
100BASE-T
•
1000BASE-T
https:/ /apps.juniper.net/hct/.
https:/ /pathfinder.juniper.net/hct/
62