Routing Engine Interface Cable And Wire Specifications For M10I Routers; Table 27: Cable Specifications For Routing Engine Management Ports - Juniper M10i Hardware Manual

M10i Multiservice Edge Router Hardware Guide

Routing Engine Interface Cable and Wire Specifications for M10i Routers

Table 27: Cable Specifications for Routing Engine Management Ports

Port
Routing Engine
console or
auxiliary
interface
Routing Engine
Ethernet
interface
Related
Documentation
200
All manuals and user guides at all-guides.com
Attenuation and Dispersion in Fiber-Optic Cable on M Series, MX Series, and T Series
Routers on page 196
Calculating Power Budget for Fiber-Optic Cable for M Series, MX Series, and T Series
Routers on page 197
For management and service operations, you connect the Routing Engine to an external
console or management network. (For more information, see "M10i Routing Engine
Description" on page 15.)
Table 27 on page 200 lists the specifications for the cables that connect to management
ports.
Cable
Specification Cable Supplied
RS-232 One 6-ft
(EIA-232) serial (1.83-m) length
with DB-9/DB-9
connectors
Category 5 cable One 15-ft
or equivalent (4.92-m) length
suitable for with
100Base-T RJ-45/RJ-45
operation connectors
M10i Routing Engine Description on page 15
Replacing an M10i Ethernet Management Cable on page 141
Replacing an M10i Console or Auxiliary Cable on page 141
Maximum Router
Length Receptacle
6 ft (1.83 m) DB-9 male
328 ft (100 m) RJ-45
autosensing
Copyright © 2010, Juniper Networks, Inc.