Juniper M10i Hardware Manual page 110

M10i Multiservice Edge Router Hardware Guide
Action
Related
Documentation
84
All manuals and user guides at all-guides.com
Check the LEDs on the Routing Engine. The green LED labeled
when it is functioning normally. For more information about the LEDs, see "M10i Routing
Engine Description" on page 15.
Issue the CLI show chassis routing-engine
Engines:
user@host> show chassis routing-engine
Routing Engine status:
Slot 0:
Current state
Election priority
Temperature
CPU temperature
DRAM
Memory utilization
CPU utilization:
User
Background
Kernel
Interrupt
Idle
Model
Serial ID
Start time
Uptime
Load averages:
Routing Engine status:
Slot 1:
Current state
Election priority
Temperature
CPU temperature
DRAM
Memory utilization
CPU utilization:
User
Background
Kernel
Interrupt
Idle
Model
Serial ID
Start time
Uptime
For further description of the output from the command, see the Junos OS System Basics
and Services Command Reference.
Installing the M10i Routing Engine on page 134
M10i Routing Engine 400 LEDs on page 19
M10i Routing Engine 850 LEDs on page 21
M10i Routing Engine Architecture Overview on page 33
ONLINE
command to check the status of the Routing
Master
Master (default)
27 degrees C / 80 degrees F
27 degrees C / 80 degrees F
768 MB
45 percent
0 percent
0 percent
3 percent
0 percent
97 percent
RE-5.0
1000647001
2009-01-28 14:11:50 PST
21 hours, 51 minutes, 16 seconds
1 minute 5 minute
0.00 0.02
Backup
Backup (default)
26 degrees C / 78 degrees F
27 degrees C / 80 degrees F
1536 MB
23 percent
0 percent
0 percent
0 percent
0 percent
99 percent
RE-850
1000648260
2009-01-28 16:18:12 PST
19 hours, 44 minutes, 51 seconds
Copyright © 2010, Juniper Networks, Inc.
lights steadily
15 minute
0.00