Figure 1: Front Of Chassis; Figure 2: Rear Of Chassis - Juniper M10i Hardware Manual

M10i Multiservice Edge Router Hardware Guide
Primary
fan tray
6
All manuals and user guides at all-guides.com
Figure 1 on page 6 and Figure 2 on page 6 show front and rear views of the router chassis.

Figure 1: Front of Chassis

Figure 2: Rear of Chassis

Compact F orw arding
Engine Boards
FAN TR A Y
1 C-F EB 0
C-F EB 1
P/S 3
P/S 1
P/S 2
NO TE : A
P/S 0 MI NIM UM
OF
TW O PO WE
BE PR ES
EN T FO
Power supplies
The chassis includes an electrostatic discharge (ESD) point (banana plug receptacle)
to protect electronic components from damage due to static electricity, at the front of
the chassis, as shown in Figure 1 on page 6.
WARNING: Before removing or installing components of a functioning router,
attach an ESD strap to an ESD point and place the other end of the strap
around your bare wrist. Failure to use an ESD strap could result in damage
to the router.
The router must be connected to earth ground during normal operation.
For chassis serial number information , see "Displaying M10i Router Components and
Serial Numbers" on page 207.
Grounding
points
FAN TR A Y
O
R SU PP
LIE S MU
R NO RM ST
AL OP ER
TIO N.
A
Redundant
fan tray
Copyright © 2010, Juniper Networks, Inc.