Guidelines For Packing M10I Components For Shipment - Juniper M10i Hardware Manual

Related
Documentation

Guidelines for Packing M10i Components for Shipment

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
If you are using a mechanical lift, place the lift platform under the router, unscrew
and remove the mounting screws from the rack, and move the router to the shipping
crate.
If you are not using a mechanical lift and the router weight is fully supported by a
shelf or another router, unscrew and remove the mounting screws from the rack.
Three people can then lift the router and move it to the shipping crate.
If you are not using a mechanical lift and the router weight is not fully supported by
a shelf or another router, three people should grasp the router while a fourth person
unscrews and removes the mounting screws from the rack. The three lifters can
then move the router to the shipping crate.
Place the router in the shipping crate or onto the pallet. If on a pallet, bolt the router
8.
to the pallet.
Cover the router with an ESD bag and place the packing foam on top of and around
9.
the router.
Replace the accessory box on top of the packing foam.
10.
Securely tape the box closed or place the crate cover over the router.
11.
Write the RMA number on the exterior of the box to ensure proper tracking.
12.
Contacting Customer Support on page 212
Returning a Hardware Component to Juniper Networks, Inc. on page 213
Tools and Parts Required to Remove Components from an M10i Router on page 214
Guidelines for Packing M10i Components for Shipment on page 215
To pack and ship individual components:
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
Use the original shipping materials if they are available.
Place individual boards in electrostatic bags.
Write the RMA number on the exterior of the box to ensure proper tracking.
CAUTION: Do not stack any of the router components.
Contacting Customer Support on page 212
Returning a Hardware Component to Juniper Networks, Inc. on page 213
Tools and Parts Required to Remove Components from an M10i Router on page 214
Appendix G: Contacting Customer Support and Returning M10i Hardware
215