Juniper M10i Hardware Manual page 102

M10i Multiservice Edge Router Hardware Guide
Related
Documentation
76
All manuals and user guides at all-guides.com
Optionally, configure additional properties by adding the necessary configuration
17.
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
When you have finished configuring the router, exit configuration mode.
18.
[edit]
root@host# exit
root@host>
NOTE: To reinstall the Junos OS, you boot the router from the removable
media. Do not insert the removable media during normal operations. The
router does not operate normally when it is booted from the removable media.
When the router boots from the storage media (removable media, CompactFlash card,
or hard disk) it expands its search in the
following files in the following order:
(the rescue configuration file), and
When the search finds the first configuration file that can be loaded properly, the file
loads and the search ends. If none of the file can be loaded properly, the routing platform
does not function properly. If the router boots from an alternate boot device, the Junos
OS displays a message indication this when you log in to the router.
Configuring CFEB Redundancy on the M10i Router
Configuring the CompactFlash Card on an M10i Routing Engine on page 138
M10i Router Site Preparation Checklist on page 39
/config directory of the routing platform for the
juniper.conf (the main configuration file),
(the first rollback configuration file).
juniper.conf.1
Copyright © 2010, Juniper Networks, Inc.
rescue.conf