Figure 66: Ac Plug Types; Table 23: Ac Power Cord Specifications - Juniper M10i Hardware Manual

M10i Multiservice Edge Router Hardware Guide

Table 23: AC Power Cord Specifications

Country
Australia
Europe (except Italy and United Kingdom)
Italy
North America
United Kingdom
190
All manuals and user guides at all-guides.com
appliance inlet coupler, type C14 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the AC power cord fits
into the power source receptacle that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the router are in
compliance.
Table 23 on page 190 provides specifications and Figure 66 on page 190 depicts the plug
on the AC power cord provided for each country or region.
Electrical Specification
240 VAC, 50 Hz AC
220 or 230 VAC, 50 Hz AC
230 VAC, 50 Hz AC
120 VAC, 60 Hz AC
240 VAC, 50 Hz AC

Figure 66: AC Plug Types

Australia China
(SAA/3)
(PSB-10)
Japan
(L6-20P)
NOTE: AC power cords must not block access to router components or drape
where people could trip on them.
Europe
(CEE 7/7) (CEI 23-16/VII)
North America
(L6-20P)
(BS89/13)
Copyright © 2010, Juniper Networks, Inc.
Plug Type
SAA/3
CEE 7/7
CEI 23-16
NEMA 5-15P
BS89/10
Italy
UK