Removing And Inserting The Pc Card From An M10I Routing Engine; Removing The Pc Card From An M10I Routing Engine - Juniper M10i Hardware Manual

Related
Documentation

Removing and Inserting the PC Card from an M10i Routing Engine

Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
Preventing Electrostatic Discharge Damage to an M10i Router on page 150
M10i Routing Engine Architecture Overview on page 33
Maintaining the M10i Routing Engine on page 83
Troubleshooting the M10i Routing Engine on page 88
A slot labeled PC CARD on the Routing Engine faceplate accepts a Type I PC Card, as
defined in the PC Card Standard published by the Personal Computer Memory Card
International Association (PCMCIA). The router is shipped with a PC Card that contains
Junos OS. The PC Card can be used to copy Junos OS from the PC Card onto the Routing
Engine. You can also copy Junos OS from the Routing Engine onto a PC Card, for example,
to create a backup copy of upgrade software that you have obtained from Juniper
Networks. Instructions for copying software to a PC Card are available at the Juniper
Networks Support Web site (
to the Customer Support Center, then to the download page for Junos OS.
NOTE: The appearance and position of electronic components or the PC
Card slot on your Routing Engine might differ from the figures in this section.
These differences do not affect Routing Engine installation and removal or
functionality.
NOTE: The software on a PC Card is loaded only onto the Routing Engine
into which the PC Card is inserted. It is not automatically copied to the other
Routing Engine.
To remove and insert a PC Card, perform the following procedures:
Removing the PC Card from an M10i Routing Engine on page 135
Inserting the PC Card in an M10i Routing Engine on page 136

Removing the PC Card from an M10i Routing Engine

The PC Card is inserted in the slot labeled
remove the PC Card (see Figure 55 on page 136):
Press the eject button located next to the PC Card slot in the Routing Engine faceplate.
1.
Note that the PC Card slot might be located in a different position from that shown
in Figure 55 on page 136.
When the PC Card pops partially out of the slot, grasp the card and pull it straight out
2.
of the slot.
Chapter 15: Replacing M10i Hardware Components
http://www.juniper.net/support/
in the Routing Engine faceplate. To
PC CARD
); after logging in, navigate
135