Juniper M10i Hardware Manual page 100

M10i Multiservice Edge Router Hardware Guide
74
All manuals and user guides at all-guides.com
Amnesiac <ttyd0>
login: root
Start the CLI.
3.
root@% cli
root>
Enter configuration mode.
4.
root> configure
Entering configuration mode.
[edit]
root@#
Add a password to the root administration user account. Enter a clear-text password.
5.
For information about using an encrypted password, or an SSH public key string (DSA
or RSA), see the Junos OS System Basics Configuration Guide.
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
Create a management console user account.
6.
[edit]
root# set system login user user-name authentication plain-text-password
New Password: password
Retype new password: password
Set the user account class to
7.
[edit]
root# set system login user user-name class super-user
Configure the name of the router. If the name includes spaces, enclose the name in
8.
quotation marks (" ").
[edit]
root@# set system host-name host-name
NOTE: The DNS server does not use the host name to resolve to the correct
IP address. This host name is used to display the name of the routing
engine in the CLI. For example, this host name shows on the command
line prompt when the user is logged on to the CLI:
user-name@host-name>
Configure the IP address of the DNS server.
9.
[edit]
root# set system name-server address
Configure the router's domain name.
10.
[edit]
root@# set system domain-name domain-name
.
super-user
Copyright © 2010, Juniper Networks, Inc.