Lubricants To Be Used - Siemens NXAIR Operating Instructions Manual

29.5 Lubricants to be used

Component
Shutter guiding linkage (1)
Guide rails (2)
Fixed contacts of feeder
earthing switch (3)
Main fixed contacts of bushings (4)
Fixed contacts of the switch-fuse
combination (5)
Fig. 746: Circuit-breaker, disconnecting, metering
and contactor panels
(panel width 600 mm)
(1) Shutter guiding linkage
(2) Guide rails
Fixed contacts of the feeder
(3)
earthing switch
(4) Fixed contacts of the bushings
110-0134.9 / 14
CAUTION
Injury due to incorrect application
Incorrect application of the lubricants can cause injuries of the sense organs or the
hands.
Observe the safety instructions in the safety data sheets of the lubricant
suppliers.
Put on personal protective
Lubricant
WD-40 waterproof spray oil
ISOFLEX TOPAS L 32
(Order no.: 3AX1133-3E 1 kg)
MOLYKOTE® LONGTERM 2
PLUS EXTREME PRESSURE
BEARING GREASE
(Order no.: 8BX1022 1 kg)
NXAIR / ≤ 40 kA
equipment.
Fig. 747: Contactor panel with panel width 435 mm
Fixed contacts of the feeder
(2)
earthing switch
(3) Fixed contacts of the bushings
Service information
Supplier
Hardware store
www.klueber.com
www.dowcorning.com
421