Operating The Busbar Connection Panel Type I; Control Elements At The Front Side Of The Panel; Position Indicator Visible On High-Voltage Door - Siemens NXAIR Operating Instructions Manual

Operating the busbar connection panel type I

15 Operating the busbar connection panel type I

15.1 Control elements at the front side of the panel

Fig. 363: Control elements on
the panel front

15.2 Position indicator visible on high-voltage door

Indicator for position of withdrawable metering part / metering truck:
Position indications for:
203
INFORMATION
Read and understand these instructions before attempting operating works.
Service position
NXAIR / ≤ 40 kA
(1) Door to the low-voltage compartment
(2) Protection device
Locking device for the door to the low-voltage
(3)
compartment
(4) Instruction label for closing the high-voltage door
(5) Handle for opening the high-voltage door
Actuating opening for inserting the double-bit key to
(6) control racking of the withdrawable
metering part / metering truck
Mechanical position indicator for withdrawable
(7)
metering part / metering truck
(8) High-voltage door
Actuating opening for racking the withdrawable
(9)
metering part / metering truck
Operating slide for opening and closing the
(10) actuating opening for racking the withdrawable
metering part / metering truck
Test sockets for busbar voltage detecting system
(11)
(type LRM) as additional component
Intermediate position Test position
110-0134.9 / 13