Siemens NXAIR Operating Instructions Manual page 237

Fig. 419: Removing the fuse-link in
Insert the new fuse-links into the clamps with the striker at the upper side.
The position of the striker is identified with a triangle representing an arrow on the rating
plate of the HV HRC fuse-link.
Fig. 421: HV HRC fuse-link inserted in the
110-0134.9 / 14
the striker area (upper side)
striker area
NXAIR / ≤ 40 kA
Operating the switch-disconnector panel
Fig. 420: Removing the fuse-link on the
opposite side of striker area
(bottom side)
Fig. 422: HV HRC fuse-link inserted on
the opposite side of striker area
237