Siemens NXAIR Operating Instructions Manual page 136

Operating the contactor panel with panel width 435 mm
Positioning the contactor truck in front of the panel
Move the contactor truck centrally in front of the contactor panel. The front wheels (1) of the
contactor truck point towards the ramps (2) at the bottom of the panel.
1
Fig. 238: Positioning the contactor truck in front of the panel
If required, support the contactor truck with the handle (3) to move it onto the ramps.
136
INFORMATION
Plugging on the low-voltage connector
The low-voltage connection couples automatically when the contactor truck is
inserted.
NXAIR / ≤ 40 kA
2
110-0134.9 / 14