Siemens NXAIR Operating Instructions Manual page 316

Accessing the connection compartment through the front
Make sure not to dent the links on the panel base while performing any further removal and
installation work.
Fig. 584: 2 links on panel base
Remove the connecting elements (2) from the protection plate (1), and store it:
•
4 nuts M8 with contact washers
Remove the protection plate (1), and store it.
Fig. 586: 4 bolted joints on protection plate
Remove the connecting elements from the partition to the connection compartment (3) inside
the switching-device compartment, and store it:
316
•
10 bolts M8x20 with contact washers and plain washers size 8
acc. to ISO 7093 (4)
•
5 bolts M8x20 with contact washers (5)
NXAIR / ≤ 40 kA
Fig. 585: Link bent in correct position
1
2
110-0134.9 / 14