Safety Instructions - Siemens NXAIR Operating Instructions Manual

1

Safety instructions

Hazards are classified in accordance with ISO 3864-2 using the following keywords:
Hazards are classified and indicated in the Operating Instructions as follows:
Definitions and symbols
110-0134.9 / 14
•
DANGER, WARNING or CAUTION, in case of personal injury
•
NOTICE for material damage
DANGER
Signal word indicates an immediate and imminent hazardous situation.
If the hazard is not avoided, death or serious injury will be the consequence.
WARNING
Signal word indicates a potentially hazardous situation.
If the hazardous situation is not avoided, death or serious injury can be the
consequence.
CAUTION
Signal word indicates a potentially hazardous situation.
If the hazardous situation is not avoided, minor or moderate injury can be the
consequence.
NOTICE
Indicates a potentially damaging situation.
If the damaging situation is not avoided, the product or something in its vicinity
may sustain damage.
INFORMATION
Provides additional information to clarify or simplify a procedure.
Observe the information.
Operation symbol:
Result symbol:
NXAIR / ≤ 40 kA
Safety instructions
Asks the operator to perform an operation.
✓
Identifies the result of an operation.
3