Siemens NXAIR Operating Instructions Manual page 179

Pull the contactor truck out of the panel using the handles.
Fig. 322: Pulling the contactor truck
If no further operation is executed: Close the high-voltage door.
✓
The contactor truck can now be moved away from the panel.
110-0134.9 / 14
Operating the contactor panel with panel width 600 mm
CAUTION
Maloperation
Protruding parts at the rear of the contactor truck can cause injuries or material
damage.
Move and operate the contactor truck only at the front side.
NOTICE
Maloperation
The locking bracket at the contactor truck is exclusively designed for interlocking
the contactor truck with the switchgear frame.
Do not push the locking bracket downwards towards LOCK if the
contactor truck is outside the panel.
NXAIR / ≤ 40 kA
179