Siemens NXAIR Operating Instructions Manual page 137

3
Fig. 239: Moving the contactor truck into the panel
Pushing the contactor truck into the panel
Push the contactor truck at the top into the panel as far it will go.
Lift the ramps (1) at the panel base upwards.
Fig. 240: Pushing the contactor truck at
Check whether the contactor truck is correctly placed into the panel by pulling it
backwards.
110-0134.9 / 14
Operating the contactor panel with panel width 435 mm
the top into the panel
NXAIR / ≤ 40 kA
1
Fig. 241: Lifting the ramps
137