Set Mobility-Profile Mode - 3Com 3CRWX120695A Command Reference Manual

216 C 7: AAA C
HAPTER
set mobility-profile
mode
OMMANDS
The following command adds port 3 to the magnolia Mobility Profile
(which is already assigned to port 2):
WX1200# set mobility-profile name magnolia port 3
success: change accepted.
See Also
"clear mobility-profile" on page 176
"display mobility-profile" on page 185
"set mac-user attr" on page 207
"set mac-usergroup attr" on page 213
"set mobility-profile mode" on page 216
"set user attr" on page 218
"set usergroup" on page 219
Enables or disables the Mobility Profile feature on the WX switch.
CAUTION: When the Mobility Profile feature is enabled, a user is denied
access if assigned a Mobility-Profile attribute in the local WX switch
database or RADIUS server when no Mobility Profile of that name exists
on the WX switch.
Syntax —
set mobility-profile mode {enable | disable}
— Enables the use of the Mobility Profile feature on the WX
enable
switch.
— Specifies that all Mobility Profile attributes are ignored by
disable
the WX switch.
Defaults — The Mobility Profile feature is disabled by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To enable the use of the Mobility Profile feature, type the
following command:
WX1200# set mobility-profile mode enable
success: change accepted.