3Com 3CRWX120695A Command Reference Manual page 154

154 C 6: IP S
HAPTER ERVICES
C
OMMANDS
— Start of the time change period.
start
— Week of the month to start or end the time change. Valid
week
values are first, second, third, fourth, or last.
— Day of the week to start or end the time change. Valid
weekday
values are sun, mon, tue, wed, thu, fri, and sat.
— Month of the year to start or end the time change. Valid
month
values are jan, feb, mar, apr, may, jun, jul, aug, sep, oct, nov, and
dec.
— Hour to start or end the time change — a value between 0
hour
and 23 on the 24-hour clock.
— Minute to start or end the time change — a value between 0
min
and 59.
— End of the time change period.
end
Default — If you do not specify a start and end time, the system
implements the time change starting at 2:00 a.m. on the first Sunday in
April and ending at 2:00 a.m. on the last Sunday in October, according to
the North American standard.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You must first set the time zone with the set timezone
command for the offset to work properly without the start and end
values.
Configure summertime before you set the time and date. Otherwise,
summertime's adjustment of the time will make the time incorrect, if the
date is within the summertime period.
Examples — To enable summertime and set the summertime time zone
to PDT (Pacific Daylight Time), type the following command:
WX1200# set summertime PDT
success: change accepted
See Also
"clear summertime" on page 115
"clear timezone" on page 116