Set Ip Https Server - 3Com 3CRWX120695A Command Reference Manual

set ip https server

Syntax —
set ip dns server ip-addr {primary | secondary}
— IP address of a DNS server, in dotted decimal or CIDR
ip-addr
notation.
— Makes the server the primary server, which MSS always
primary
consults first for resolving DNS queries.
— Makes the server a secondary server. MSS consults a
secondary
secondary server only if the primary server does not reply.
Defaults — None.
Access — Enabled.
Usage — You can configure a WX switch to use one primary DNS server
and up to five secondary DNS servers.
Examples — The following commands configure a WX switch to use a
primary DNS server and two secondary DNS servers:
WX1200# set ip dns server 10.10.10.50/24 primary
success: change accepted.
WX1200# set ip dns server 10.10.20.69/24 secondary
success: change accepted.
WX1200# set ip dns server 10.10.30.69/24 secondary
success: change accepted.
See Also
"clear ip dns domain" on page 110
"clear ip dns server" on page 111
"display ip dns" on page 120
"set ip dns" on page 137
"set ip dns domain" on page 138
Disables or reenables the HTTPS server on a wireless LAN switch.
CAUTION: If you disable the HTTPS server, Web Manager access to the
WX switch is also disabled.
set ip https server 139