History; Set Banner Motd - 3Com 3CRWX120695A Command Reference Manual

46 C 3: S
HAPTER YSTEM

history

set banner motd

S C
ERVICE OMMANDS
See Also
"Using CLI Help" on page 29
Displays the command history buffer for the current CLI session.
Syntax —
history
Default — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — To show the history of your session, type the following
command:
WX4400> history
Show History (most recent first)
--------------------------------
[00] display config
[01] display version
[02] enable
See Also
"clear history" on page 38
Configures the banner string that is displayed before the beginning of
each login prompt for each CLI session on the WX switch.
Syntax —
set banner motd ^text^
— Delimiting character that begins and ends the message.
^
— Up to 2000 alphanumeric characters, including tabs and
text
carriage returns, but not the delimiting character (^). The maximum
number of characters is approximately 24 lines by 80 characters.
Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.