Set User Group - 3Com 3CRWX120695A Command Reference Manual

set user group

set usergroup
Adds a user to a user group. The user must have a password and a profile
that exists in the local database on the WX switch.
(To configure a user in RADIUS, see the documentation for your RADIUS
server.)
Syntax —
set user username group group-name
— Username of a user with a password.
username
— Name of an existing user group for password users.
group-name
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — MSS does not require users to belong to user groups.
To create a user group, user the command set usergroup.
Examples — The following command adds user Hosni to the cardiology
user group:
WX4400# set user Hosni group cardiology
success: change accepted.
See Also
"clear user group" on page 177
"display aaa" on page 180
Creates a user group in the local database on the WX switch for users
and assigns authorization attributes for the group.
(To create user groups and assign authorization attributes in RADIUS, see
the documentation for your RADIUS server.)
Syntax —
set usergroup group-name attr attribute-name value
— Name of a group for password users. Specify a name
group-name
of up to 32 alphanumeric characters, with no spaces.
set user group 219