Set System Name - 3Com 3CRWX120695A Command Reference Manual

Wireless lan mobility system wireless lan switch and controller

Hide thumbs Also See for 3CRWX120695A:

Table of Contents

set system name

"set system contact" on page 51

"set system name" on page 55

Changes the name of the WX switch from the default system name and

also provides content for the CLI prompt, if you do not specify a prompt.

set system name string

— Alphanumeric string up to 256 characters long, with no

blank spaces. Use a unique name for each WX switch.

Default — By default, the system name and command prompt have the

same value. The factory default for both is the model number (WX1200

for the 3Com Wireless LAN Switch WX1200, WX4400 for the 3Com

Wireless LAN Controller WX4400).

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — Entering set system name with no string resets the system

name to the factory default.

To view the system name string, type the display system command.

Examples — The following example sets the system name to a name

that identifies the WX switch:

WX4400# set system name WX-bldg3

success: change accepted.

Table of Contents

3crwx440095a