set spantree
portfast
set spantree portpri
See Also
"clear spantree portcost" on page 316
"clear spantree portvlancost" on page 317
"display spantree" on page 320
"display spantree portvlancost" on page 325
"set spantree portvlancost" on page 338
Enables or disables STP port fast convergence on one or more ports on a
wireless LAN switch.
Syntax —
set spantree portfast port port-list {enable | disable}
port port-list
specified ports.
— Enables port fast convergence.
enable
— Disables port fast convergence.
disable
Defaults — STP port fast convergence is disabled by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Use port fast convergence on ports that are directly connected
to servers, hosts, or other MAC stations.
Examples — The following command enables port fast convergence on
ports 2, 5, and 7:
WX1200# set spantree portfast port 2,4,7 enable
success: change accepted.
See Also
"display spantree portfast" on page 324
Changes the STP priority of a network port or ports for selection as part
of the path to the STP root bridge in the default VLAN on a wireless LAN
switch.
— List of ports. MSS enables the feature on the
set spantree portfast
337