Set Authentication Web - 3Com 3CRWX120695A Command Reference Manual

set authentication
web
See Also
"clear authentication mac" on page 169
"display aaa" on page 180
"set authentication admin" on page 189
"set authentication console" on page 191
"set authentication dot1x" on page 193
"set authentication last-resort" on page 197
"set authentication web" on page 201
Configures an authentication rule to allow a user to log in to the network
using a web page served by the WX switch. The rule can be activated if
the user is not otherwise granted or denied access by 802.1X, or granted
access by MAC authentication.
Syntax —
set authentication web {ssid ssid-name | wired}
user-glob method1 [method2] [method3] [method4]
— A single user or a set of users.
user-glob
Specify a username, use the double-asterisk wildcard character (**) to
specify all usernames, or use the single-asterisk wildcard character (*)
to specify a set of usernames up to or following the first delimiter
character—either an at sign (@) or a period (.). (For details, see "User
Globs" on page 24.)
ssid ssid-name
applies. To apply the rule to all SSIDs, type any.
— Applies this authentication rule specifically to users
wired
connected to a wired authentication port.
,
method1 method2, method3, method4
methods that MSS uses to handle authentication. Specify one or more
of the following methods in priority order. MSS applies multiple
methods in the order you enter them.
A method can be one of the following:
— Uses the local database of usernames and user groups on
local
the WX switch for authentication.
— SSID name to which this authentication rule

set authentication web

— At least one and up to four
201