Set Mobility-Domain Member - 3Com 3CRWX120695A Command Reference Manual

226 C 8: M
HAPTER OBILITY
set
mobility-domain
member
D C
OMAIN OMMANDS
Examples — To display Mobility Domain status, type the following
command:
WX4400# display mobility-domain status
Mobility Domain name:
Member
---------------
192.168.253.11
192.168.253.12
192.168.253.14
Table 42 describes the fields in the display.
Table 42 display mobility-domain Output
Field
Mobility Domain
name
Member
State
Status
See Also
"clear mobility-domain" on page 223
"set mobility-domain member" on page 226
"set mobility-domain mode member seed-ip" on page 227
On the seed WX switch, adds a member to the list of Mobility Domain
members. If the current WX switch is not configured as a seed, this
command is rejected.
Syntax —
set mobility-domain member ip-addr
— IP address of the Mobility Domain member in dotted
ip-addr
decimal notation.
Pleasanton
State
-------------
STATE_UP
STATE_DOWN
STATE_UP
Description
Name of the Mobility Domain
IP addresses of the seed WX switch and members in the
Mobility Domain
State of the WX switch in the Mobility Domain:
STATE_UP
STATE_DOWN
Role of the WX switch in the Mobility Domain:
MEMBER
SEED
Status
--------------
MEMBER
MEMBER
SEED