Clear Prompt; Clear System - 3Com 3CRWX120695A Command Reference Manual

clear prompt

clear system

Examples — To clear the history buffer, type the following command:
WX4400# clear history
success: command buffer was flushed.
See Also
"history" on page 46
Resets the system prompt to its previously configured value. If the prompt
was not configured previously, this command resets the prompt to its
default.
Syntax —
clear prompt
Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To reset the prompt, type the following command:
wildebeest# clear prompt
success: change accepted.
WX4400#
See Also
"set prompt" on page 50. (For information about default prompts,
see "Command Prompts" on page 22.)
Clears the system configuration of the specified information.
CAUTION: If you change the IP address, any currently configured
Mobility Domain operations cease. You must reset the Mobility Domain.
Syntax —
clear system [contact | countrycode | ip-address |
location | name]
— Resets the name of contact person for the WX switch to
contact
null.
— Resets the country code for the WX switch to null.
countrycode
— Resets the IP address of the WX switch to null.
ip-address
clear prompt 39