Display Snmp Configuration - 3Com 3CRWX120695A Command Reference Manual

display snmp
configuration
Table 33 Output for display ntp (continued)
Field
NTP Server
Peer state
Local state
See Also
"clear ntp server" on page 113
"clear summertime" on page 115
"clear timezone" on page 116
"display timezone" on page 131
"set ntp" on page 147
"set ntp server" on page 148
"set summertime" on page 153
"set timezone" on page 157
Shows SNMP settings on a wireless LAN switch.
Syntax —

display snmp configuration

Default — None.
Access — All.
History — Introduced in MSS Version 3.0.
Description
IP address of the NTP server.
State of the NTP session from the point of view of the NTP
server:
CORRECT
REJECT
SELCAND
SYNCCAND
SYSPEER
State of the NTP session from the point of view of the WX
switch's NTP client:
INITED
START
SYNCED
display snmp configuration 127