Set Radio-Profile Max-Rx-Lifetime - 3Com 3CRWX120695A Command Reference Manual

set radio-profile
max-rx-lifetime
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You must disable all radios that are using a radio profile before
you can change parameters in the profile. Use the set radio-profile
mode command.
Examples — The following command changes the long retry threshold
for radio profile rp1 to 8:
WX4400# set radio-profile rp1 long-retry 8
success: change accepted.
See Also
"display radio-profile" on page 254
"set radio-profile mode" on page 287
"set radio-profile short-retry" on page 294
Changes the maximum receive threshold for the MAP radios in a radio
profile. The maximum receive threshold specifies the number of
milliseconds that a frame received by a radio can remain in buffer
memory.
Syntax —
set radio-profile name max-rx-lifetime time
— Radio profile name.
name
— Number of milliseconds. You can enter a value from 500
time
(0.5 second) through 250,000 (250 seconds).
Defaults — The default maximum receive threshold for MAP radios is
2000 ms (2 seconds).
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You must disable all radios that are using a radio profile before
you can change parameters in the profile. Use the set radio-profile
mode command.

set radio-profile max-rx-lifetime

285