Set Interface Status; Set Ip Alias - 3Com 3CRWX120695A Command Reference Manual

136 C 6: IP S
HAPTER

set interface status

set ip alias

C
ERVICES OMMANDS
See Also
"clear interface" on page 109
"display interface" on page 118
"set interface status" on page 136
Administratively disables or reenables an IP interface.
Syntax —
set interface vlan-id status {up | down}
— VLAN name or number.
vlan-id
— Enables the interface.
up
— Disables the interface.
down
Defaults — IP interfaces are enabled by default.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command disables the IP interface on VLAN
mauve:
WX4400# set interface mauve status down
success: set interface mauve to down
See Also
"clear interface" on page 109
"display interface" on page 118
"set interface" on page 135
Configures an alias, which maps a name to an IP address. You can use
aliases as shortcuts in CLI commands.
Syntax —
set ip alias name ip-addr
— String of up to 32 alphanumeric characters, with no spaces.
name
— IP address in dotted decimal notation.
ip-addr
Defaults — None.