Display Mobility-Domain Config; Display Mobility-Domain Status - 3Com 3CRWX120695A Command Reference Manual

display
mobility-domain
config
display
mobility-domain
status
Examples — The following command clears a Mobility Domain member
with the IP address 192.168.0.1:
WX1200# clear mobility-domain member 192.168.0.1
See Also
"set mobility-domain member" on page 226
Displays the configuration of the Mobility Domain.
Syntax —

display mobility-domain config

Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the Mobility Domain
configuration:
WX4400# display mobility-domain config
This WX is a member, with seed 192.168.14.6
See Also
"clear mobility-domain" on page 223
"set mobility-domain member" on page 226
"display mobility-domain status" on page 225
On the seed WX, displays the Mobility Domain status and members.
Syntax —

display mobility-domain status

Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
display mobility-domain config 225