Configuring Profile Application Mode - 3Com SuperStack 4 Configuration Manual

224 C 8: ACL C
HAPTER ONFIGURATION
Configuring QoS Profile
Configuring Profile
Application Mode
You must first define ACLs for the traffic actions before adding the actions to the
QoS profile.
Entering QoS Profile View
To configure the QoS profile, you must first enter QoS profile view.
Perform the following configuration in System View.
Table 249 Entering QoS Profile View
Operation
Enter QoS profile view
Delete the QoS profile
You cannot delete the specific QoS profile which has been applied to the port.
Adding/Removing Traffic Action to a QoS Profile
From the QoS Profile View, you can configure the QoS actions for current QoS
profile. The maximum action numbers in one QoS profile is 32.
Perform the following configuration in QoS Profile View.
Table 250 Adding/Removing Traffic Action to QoS Profile
Operation Command
Add packet filtering
packet-filter inbound ip-group
action
rule
link-group
Add traffic policing
traffic-limit inbound ip-group
action
rule
link-group
exceed
Add preference
traffic-priority inbound { ip-group
replacing action
rule
link-group
dscp_value
} } | {
local-precedence
Remove packet
undo packet-filter inbound { ip-group
filtering action
[ rule
link-group
Remove traffic policing
undo traffic-limit inbound { ip-group
action
rule
link-group
Remove preference
undo traffic-priority inbound { ip-group
replacing action
acl_number
rule
You cannot remove the packet filtering, traffic policing or preference replacing
action from the QoS profile which has been applied to the port.
After you configure the QoS profiles and the user passes the authentication, the
Switch will deliver the right profile dynamically to the port from which the user is
accessed. The QoS profile can be delivered to the port in these different modes:
Command
qos-profile profile-name
profile-name
undo qos-profile
[ link-group acl_number
acl_number [ rule
acl_number
[ link-group
acl_number
[ rule
action
]
rule [ link-group acl_number
acl-number
[ rule
| ip-precedence {
pre_value
| from-ipprec } |
pre_value
rule [ link-group
acl_number [ rule
rule acl_number
[ link-group
acl_number
[ rule
[ rule rule [ link-group
] ] | link-group acl_number
acl_number
rule rule ] ] |
rule ] }
acl_number
rule
rule ] ] |
rule target_rate
] }
acl_number
rule rule
rule
] } { { dscp
pre_value
| from-cos
}*
acl_number
acl_number rule rule
rule ] }
acl_number
rule
rule
rule
] }
acl_number
[ rule rule
[ rule
[ rule
[
[
] ] |
] ] |
[
] ] |
rule
] }