Set Ip Ssh Server - 3Com 3CRWX120695A Command Reference Manual

set ip ssh server

Examples — The following command changes the idle timeout value to
20 minutes:
WX4400# set ip ssh idle-timeout 20
success: idle timeout set to 20 minutes
See Also
"set ip ssh" on page 143
"set ip ssh absolute-timeout" on page 143
"set ip ssh server" on page 145
Disables or reenables the SSH server on a wireless LAN switch.
CAUTION: If you disable the SSH server, SSH access to the WX switch is
also disabled.
Syntax —
set ip ssh server {enable | disable}
— Enables the SSH server.
enable
— Disables the SSH server.
disable
Default — The SSH server is enabled by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You must generate an SSH encryption key to use SSH.
The maximum number of SSH sessions supported on a WX switch is
eight. If Telnet is also enabled, the WX switch can have up to eight Telnet
or SSH sessions, in any combination, and one Console session.
See Also
"crypto generate key" on page 392
"set ip ssh" on page 143
"set ip ssh absolute-timeout" on page 143
"set ip ssh idle-timeout" on page 144
set ip ssh server 145