Display Fdb Agingtime - 3Com 3CRWX120695A Command Reference Manual

94 C 5: VLAN C
HAPTER
WX4400# display fdb 00:*
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG Dest MAC/Route Des [CoS]
---- ---- ------------------ -----
1 00:01:97:13:0b:1f
1 00:0b:0e:02:76:f5
Total Matching FDB Entries Displayed = 2
display fdb
agingtime
OMMANDS
The following command displays all entries that begin with the MAC
address glob 00:
Table 20 describes the fields in the display fdb output.
Table 20 Output for display fdb
Field
VLAN
TAG
Dest MAC/Route Des
CoS
Destination Ports
Protocol Type
Total Matching FDB
Entries Displayed
See Also
"clear fdb" on page 90
"set fdb" on page 101
Displays the aging timeout period for forwarding database entries.
Syntax —
display fdb agingtime [vlan vlan-id]
vlan vlan-id
the aging timeout period for each VLAN is displayed.
Destination Ports
-----------------------------------------
1
1
Description
VLAN number.
VLAN tag value. If the interface is untagged, the TAG field
is blank.
MAC address of this forwarding entry's destination.
Type of entry. The entry types are explained in the first
row of the command output.
Note: This Class of Service (CoS) value is not associated
with MSS quality of service (QoS) features.
Wireless LAN switch port associated with the entry. A WX
switch sends traffic to the destination MAC address
through this port.
Layer 3 protocol address types that can be mapped to this
entry.
Number of entries displayed by the command.
— VLAN name or number. If you do not specify a VLAN,
[Protocol Type]
[ALL]
[ALL]