420
C
15: 802.1X M
HAPTER
clear dot1x timeout
supplicant
clear dot1x
tx-period
C
ANAGEMENT
OMMANDS
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To reset the default timeout for requests to an
authentication server, type the following command:
WX4400# clear dot1x timeout auth-server
success: change accepted.
See Also
"display dot1x" on page 421
"set dot1x timeout auth-server" on page 431
Resets to the default setting the number of seconds that must elapse
before the WX switch times out an authentication session with a
supplicant (client).
Syntax —
clear dot1x timeout supplicant
Defaults — The default for the authentication timeout sessions is
30 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — Type the following command to reset the timeout period
for an authentication session:
WX4400# clear dot1x timeout supplicant
success: change accepted.
See Also
"display dot1x" on page 421
"set dot1x timeout supplicant" on page 431
Resets to the default setting the number of seconds that must elapse
before the WX switch retransmits an EAP over LAN (EAPoL) packet.
Syntax —
clear dot1x tx-period