display ip telnet
display ntp
Shows information about the Telnet management port.
Syntax —
display ip telnet
Default — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status
----------------------------------
Enabled
Table 32 describes the fields in this display.
Table 32 Output for display ip telnet
Field
Description
Server Status State of the HTTPS server:
Enabled
Disabled
Port
TCP port number on which the WX switch listens for Telnet
management traffic.
See Also
"clear ip telnet" on page 112
"display ip https" on page 121
"set ip https server" on page 139
"set ip telnet" on page 146
"set ip telnet server" on page 146
Shows NTP client information.
Syntax —
display ntp
display ip telnet
Port
23
125