Display Location Policy - 3Com 3CRWX120695A Command Reference Manual

184 C 7: AAA C
HAPTER
display location
policy
OMMANDS
Table 39 display accounting statistics Output (continued)
Event-Timestamp
Acct-Session-Time
Acct-Output-Octets
Acct-Input-Octets
Acct-Output-Packets Number of packets the WX switch has sent during the
Acct-Input-Packets
Vlan-Name
Calling-Station-Id
Nas-Port-Id
Called-Station-Id
See Also
"clear accounting" on page 165
"display aaa" on page 180
"set accounting {admin | console}" on page 186
Displays the list of location policy rules that make up the location policy
on an WX switch.
Syntax —

display location policy

Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Time (in seconds since January 1, 1970) at which the event
was triggered. (See RFC 2869 for more information.)
Number of seconds that the session has been online.
Number of octets the WX switch has sent during the
session.
Number of octets the WX switch has received during the
session.
session.
Number of packets the WX switch has received during the
session.
Name of the client's VLAN.
MAC address of the supplicant (client).
Number of the port and radio on the MAP access point
through which the session was conducted.
MAC address of the MAP access point through which the
client reached the network.